Pre-Construction
One part of New Tenekil Plus was mixed with eighty parts of water to make a 1.25% solution. Solution to be applied at
the rate of 5 liters per 10 square feet to the whole area. After excavation of
foundatin, this solution to be applied again at the rate of 5 liters per 10
square feet on the surface. Final application to be made after earth filling and
soiling at the rate of 5 liters per 10 square feet.
Post Construction
Drill holes inside the building
on the floor along the walls and wooden door frames. Fill them with 1.25%
solution and then close them. The distance between holes in the flooring should be
between 2 and 3 feet. Moles should be drilled up to soil level. For treatment of the surrounding area, a foot-deep and a foot-wide trench to be dug along the
foundations of the building. Inject the trench with 1.25% New Teneil Plus
solution at the rate of 5 liters per 10 square feet. The surrounding area is cemented, and then the same method of drilling holes in the floor, as used for
inside treatment, may be followed.
پری کنسٹرکشن
نیو ٹینیکل پلس کے ایک حصے کو پانی کے اسی حصے میں ملا کر 1.25 فیصد محلول بنایا گیا۔ محلول کو 5 لیٹر فی 10 مربع فٹ کی شرح سے پورے علاقے پر لاگو کیا جائے۔ فاؤنڈیشن کی کھدائی کے بعد، اس محلول کو دوبارہ سطح پر 5 لیٹر فی 10 مربع فٹ کی شرح سے لگایا جائے۔ 5 لیٹر فی 10 مربع فٹ کی شرح سے زمین بھرنے اور مٹی ڈالنے کے بعد حتمی درخواست کی جائے گی۔
پوسٹ کنسٹرکشن
عمارت کے اندر دیواروں اور لکڑی کے دروازے کے فریموں کے ساتھ فرش پر سوراخ کریں۔ انہیں 1.25% محلول سے بھریں اور پھر بند کریں۔ فرش میں سوراخوں کے درمیان فاصلہ 2 سے 3 فٹ کے درمیان ہونا چاہیے۔ تل کو مٹی کی سطح تک کھودنا چاہئے۔ ارد گرد کے علاقے کے علاج کے لیے عمارت کی بنیادوں کے ساتھ ایک فٹ گہری اور فٹ چوڑی خندق کھودی جائے گی۔ خندق کو 1.25% نیو ٹینیل پلس محلول کے ساتھ 5 لیٹر فی 10 مربع فٹ کی شرح سے انجیکشن لگائیں۔ آس پاس کے علاقے کو سیمنٹ کیا جاتا ہے، اور پھر فرش میں سوراخ کرنے کا وہی طریقہ، جو اندرونی علاج کے لیے استعمال ہوتا ہے، پر عمل کیا جا سکتا ہے۔